Post Offer Free
Ningbo Pecaf Electronic And Technology Co., Ltd.
Ningbo Pecaf Electronic And Technology Co., Ltd.  

Gold Index: 31963

You are here: home  > Elevator infrared light curtain  > Elevator light curtain( 32 pairs of diodes and 154 beams)  > Elevator Photocell Elevator Light Curtain

Elevator Photocell Elevator Light Curtain 

Payment Terms: T/T 
Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: LC32-M
Production Capacity: 1000 packs
Delivery Date: one week
Elevator fitting factory: Elevator light curtain
Operation control: button control
Rated speed: 7s
Light Immunity: ≥100.000LUX
Infra Red Diodes Range: 58 mm
Means of Transport: Ocean,Air
Packing: paper tube each unit,5 unit...
Brand Name: PecafTECH
Product specification: 154Beams
Rated load: 2000KG
Unit: Wrap
Number of Infra Red Diodes: 32iodes Sets
Scanning Beams: 154~94 Beams

1.Mitsubishi type two-in-one safety touch panel screen.
2.Safety contact plate directly can replace MITSUBISHI.
3.2-IN-1 Elevator Photocell.


Product name:MITSUBISHI 2-IN-1 Elevator Photocell



1. ningbo pecaf electronic technology limited company is located in Ningbo, Ningbo jiangdong high-tech science and technology park is a high-tech research and development enterprise, specializing in infrared screens, elevator the elevator control cabinet accessories, ladder, direction indicator, Elevator power feedback controller, lift loads weighing device.

2
. Companies rely on efficient quality management system, through certification and CE certificate of authority; elevators by the State quality supervision and inspection center test targets to meet and exceed the national standards, products are widely used in all kinds of passenger elevators, freight elevators.

3. Adhere to the people-oriented, technology-based, depending on the quality of life survive, credibility, constantly improving production technology to improve quality, continuous innovation and improvement in product development.

4. Elevator screens introduced Germany technology doubly good quality brands and reliable secure, factory direct marketing services in place.

1.Mechanical safety edge and infrared light curtain protection combo;

2.Shoe shape according to the mechanical safety edge design, suitable for all kinds of elevators;

3.Failure/light curtain can automatically switch to a mechanical safety edge mode;

4.New ultrasensitive, 154 infrared beams to provide the greatest degree of protection;

5.Number of high reliability of MCU control chip, product performance and stability;

6.Auto diagnosis failure protection functions, intelligent identification shielding fault light beam;

7.Private interface and special cables and more durable, bent more than 20 million times;

MITSUBISHI 2-IN-1 Elevator Photocell
Technical parameters:

ItemsTechnical ParametersTechnical Parameters
Scanning beams33 - 94 beams (infrared)94 - 154 beams (infrared)
Sensors Number17 pairs (refer to pictures)32 pairs (refer to pictures)
Infra red diodes range117 mm (refer to pictures)58 mm (refer to pictures)
Beams Center Points Interval10.5mm/11.5mm (refer to pictures)5.5mm
Scanning FormLine by lineLine by line
Response Time61msec(relating to detecting points of scanning cycle)61msec(relating to detecting points of scanning cycle)
Detecting Height25-1860mm25-1860mm
Detecting Range0~3m moving door0~5m moving door
Light Immunity100,000lux(visible light)100,000lux(visible light)
Allowable Deviation Angle≤10°≤10°
Allowable Deviation PositionVertical: ±10mm/7°Vertical: ±10mm/7°
Horizontal: ±5mm/5°Horizontal: ±5mm/5°
Protecting StatesCable faultCable fault
Power faultPower fault
Current ConsumptionLess than100mALess than100mA
Protection GradeIP54 standardIP54 standard
Ambient Temp.-20°C~ +70°C-20°C~ +70°C
Storage Temperature-40°C~ +80°C-40°C~ +80°C
Other functionsOne transmitter is shielded after 120s' blockingOne transmitter is shielded after 120s' blocking
IndicatorPower (green LED)Power (green LED)
System fault/beams blocked(orange LED)System fault/beams blocked(orange LED)
Shell MaterialAluminum alloy surfaceAluminum alloy surface
spray plastic(black)spray plastic(black)
Shell Cover (light filter)Embedded installation of infrared penetratingEmbedded installation of infrared penetrating
for blocking off non-infraredfor blocking off non-infrared
AuthenticationTUV CE(EMC En12015 En12016)TUV CE(EMC En12015 En12016)
Working Voltage200~240VAC or 12-30VDC200~240VAC or 12-30VDC
Power supply220VAC \ 24VDC \12VDC220VAC \ 24VDC \12VDC

MITSUBISHI 2-IN-1 Elevator Photocell
     

















                                           220V power box specifications
Dimensions
120mm(l) *67mm (w) *45mm (h)
Input voltage
220VAC±20% 50/60HZ
Power requirements
4VA
Skin material
Flame retardant plastics
Relay type
Normally open, COM port, 1 Group 1 group normally closed
Relay voltage and capacity
250V AC 7A or 30V DC 7A
Work status is displayed             
Red LED indicates power status
Green LED indicates the light curtain output status
Buzzer switch (optional)
Through power box switch adjustment ON/OFF
Electromagnetic compatibility EMC
EN12015, EN12016

















MITSUBISHI 2-IN-1 Elevator Photocell


Ms. Helen
 Ms. Helen

Tel: 86-574-27785636
Fax: 86-574-27785637
Contact to this supplier

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center  for help!

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

Ningbo Pecaf Electronic And Technology Co., Ltd. [China (Mainland)]


Business Type:Manufacturer, Trading Company
City: Ningbo
Province/State: Zhejiang
Country/Region: China (Mainland)

You May Like: