Ningbo Pecaf Electronic And Technology Co., Ltd.
|
Price: | 68.0~80.0 USD |
Payment Terms: | T/T |
Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Product name:H32 HITACHI 2-IN-1 Elevator Light Screen Elevator Photocell
1.ningbo
pecaf electronic technology limited company is located in Ningbo,
Ningbo jiangdong high-tech science and technology park is a high-tech
research and development enterprise, specializing in infrared
screens, elevator the elevator control cabinet accessories, ladder,
direction indicator, Elevator power feedback controller, lift loads
weighing device.
2.Companies rely on efficient quality
management system, through certification and CE certificate of
authority; elevators by the State quality supervision and inspection
center test targets to meet and exceed the national standards, products
are widely used in all kinds of passenger elevators, freight elevators.
3.Adhere
to the people-oriented, technology-based, depending on the quality of
life survive, credibility, constantly improving production technology to
improve quality, continuous innovation and improvement in product
development.
4.Elevator screens introduced Germany
technology doubly good quality brands and reliable secure, factory
direct marketing services in place.
H32 HITACHI 2-IN-1 Elevator Light Screen Elevator Photocell
1.Anti-jamming performance strong light, without interference from sunlight and other light sources;
2.New ultra sensitive, 154 infrared beams to provide the greatest degree of protection;
3.Using the high-tech design high reliability of MCU control chip, product performance and stability;
4.Fast automatic diagnosis failure protection functions, intelligent identification shielding fault light beam;
5.With integrated cable interface and special cables, resistant and more than 20 million times;
6.Product appearance design appearance, more accessible for on-site debugging installation;
7.To select the PNP and NPN no power signal output;
H32 HITACHI 2-IN-1 Elevator Light Screen Elevator Photocell
Technical parameters:
Items | Technical Parameters | Technical Parameters |
Scanning beams | 33 - 94 beams (infrared) | 94 - 154 beams (infrared) |
Sensors Number | 17 pairs (refer to pictures) | 32 pairs (refer to pictures) |
Infra red diodes range | 117 mm (refer to pictures) | 58 mm (refer to pictures) |
Beams Center Points Interval | 10.5mm/11.5mm (refer to pictures) | 5.5mm |
Scanning Form | Line by line | Line by line |
Response Time | 61msec(relating to detecting points of scanning cycle) | 61msec(relating to detecting points of scanning cycle) |
Detecting Height | 25-1860mm | 25-1860mm |
Detecting Range | 0~3m moving door | 0~5m moving door |
Light Immunity | 100,000lux(visible light) | 100,000lux(visible light) |
Allowable Deviation Angle | ≤10° | ≤10° |
Allowable Deviation Position | Vertical: ±10mm/7° | Vertical: ±10mm/7° |
Horizontal: ±5mm/5° | Horizontal: ±5mm/5° | |
Protecting States | Cable fault | Cable fault |
Power fault | Power fault | |
Current Consumption | Less than100mA | Less than100mA |
Protection Grade | IP54 standard | IP54 standard |
Ambient Temp. | -20°C~ +70°C | -20°C~ +70°C |
Storage Temperature | -40°C~ +80°C | -40°C~ +80°C |
Other functions | One transmitter is shielded after 120s' blocking | One transmitter is shielded after 120s' blocking |
Indicator | Power (green LED) | Power (green LED) |
System fault/beams blocked(orange LED) | System fault/beams blocked(orange LED) | |
Shell Material | Aluminum alloy surface | Aluminum alloy surface |
spray plastic(black) | spray plastic(black) | |
Shell Cover (light filter) | Embedded installation of infrared penetrating | Embedded installation of infrared penetrating |
for blocking off non-infrared | for blocking off non-infrared | |
Authentication | TUV CE(EMC En12015 En12016) | TUV CE(EMC En12015 En12016) |
Working Voltage | 200~240VAC or 12-30VDC | 200~240VAC or 12-30VDC |
Power supply | 220VAC \ 24VDC \12VDC | 220VAC \ 24VDC \12VDC |
H32 HITACHI 2-IN-1 Elevator Light Screen Elevator Photocell
220V power box specifications | |
Dimensions | 120mm(l) *67mm (w) *45mm (h) |
Input voltage | 220VAC±20% 50/60HZ |
Power requirements | 4VA |
Skin material | Flame retardant plastics |
Relay type | Normally open, COM port, 1 Group 1 group normally closed |
Relay voltage and capacity | 250V AC 7A or 30V DC 7A |
Work status is displayed | Red LED indicates power status Green LED indicates the light curtain output status |
Buzzer switch (optional) | Through power box switch adjustment ON/OFF |
Electromagnetic compatibility EMC | EN12015, EN12016 |